Gigabyte motherboard boot Baocuo handling a case 不指定
mahmoud
Gigabyte motherboard boot Baocuo handling a case 
This motherboard can boot light, but the first screen displayed when the Baocuo. Baocuo reads as follows:
I would like to see this picture a lot of people think the first thing is to brush program. My first thought is also brush approach procedures.
In fact, think of this approach to be wrong
The following simple program to talk about my brush method in pre-processing chips, which I removed the BIOS chip
In fact, think of this approach to be wrongThe following simple program to talk about my brush method in pre-processing chips, which I removed the BIOS chip
The chip pin flat on the desktop, back and forth friction. Chip feet are not flat, or oxidation problem
After the effect of friction. How kind, very bright bar
The chip into the adapter cradle
Aligned position welding up
This is what I look like after a good solder bar pretty nea
Nonsense finished, said the focus of it, in fact, I brushing process, the piece of board is still the same situation. So I suspect that the wrong version BIOS program, been replaced by another one, or the same problem. Chip brush or later for no avail. Therefore suspected to be caused by IO. But the hand at that time no such IO. So we set aside in the evening I asked my teacher, he said that the memory problems will cause this situation. So the next day at work, immediately changed a memory. OK, normal.
Author:corps@Computer repair enthusiasts
Address:http://www.itstrip.cn/read.php?72
All rights reserved. Must be reproduced in the form of annotated links the author and the original source and this statement!
Address:http://www.itstrip.cn/read.php?72
All rights reserved. Must be reproduced in the form of annotated links the author and the original source and this statement!
