bulbs are regular and stand at code 39 Rams and processors
have been changed and all components have
been examined and there is nothing new The BIOS has been shipped with more than one version and there is no new
The BIOS chip has been replaced from another Mazerboard the same The type worked well
– the conclusion was that the chip
was damaged and the problem was also in the absence of the chip with an area of 8 MB
, the DVD drive
was used, the flash was shipped to the DVD which is MX25L1605 with the required socket
and the problem ended
: Thank God 10/10
Model P4S800-MX Malfunction
: Do not sen
d Data
Mode on Tester
Irdy: ON
Frame: ON
Reset: FLASHING
Code: D0
The BIOS chip bearing number SST39SF020A was shipped
with the required file and worked perfectly
: Result : Praise be to God 10/10
stages to detect the holidays:
* Voltage on the Ram Mesh is
* tranny Ram APM2050N number appeared to be the effects of damage
* was replaced Baltranzistur number APM3054N The result volt RAM is fully
* shipped memory stick Alvallos W39v040FBPZ number
file The required, and worked perfectly
: The result: Praise be to God, 10/10
Model: PM945GZ
: The device is separated on Windows and
diagnostic attempts : in a capacitor numbered on the C169 and a value of 1000 / 6.3 on which the bulge is displayed
Solution: the capacitor has been replaced and the
Holidays: conclusive Data
diagnosis: cardcover up allbulbsregular code FF-FF
shows the presenceswollen capacitors 14 worth 1000 / 6.3
plus Mosfet and number on Albordh ce233 his number 9916H side socket processor
solution: Capacitors were replaced and the mosfets replaced by N306AD
and fully functional
: Rose Data Detector
Diagnostic: Cover-up Mode (FF-FF)
On examination it was found that there is a Mosfet behind the screen card number 9916H in
addition to a track cut near the graying sub
Solution:
The Mosfite was replaced by N306AD
Bridge work Track, praise be to God 10/10
Holidays: conclusive Data
Diagnosis: cover FF-FF
scans show shorts inMOSFET Ram numbered B1202
Solution: was replaced by APM3054 praiseAllah
[Only registered and activated users can see links. Click here to register ]
holidays: interrupted him Bauer completely
from the other ores have
been tracking failures Alpaor down to lock it
worked Al Qaflah not a new
code –
Alhibat: What Fish heated
bulbs voltages Altestr Mnoran
and the rest of the bulbs OFF
Albroosissour do not heat
you raise Alheitsenk for the southern gray hairs
found water vapor Effects of Or something similar,
I heated over the gray hair, all the problems ended, the
final result
Thank God 10/10
Model: ga-g31m-es2c
tracked malfunction Alpaor down to lock the
score –
what Fish any hottest any piece
you measure south of gray hair
gave me confabulation
after removing all components (Albroosissour + RAM + Battery)
measurement of gray hair mesh Mazboot
hand sound And the rest of the dimensions are
noticeable. Noticeable: When installing the fallow cable, notice the lighting of the light bulbs in the tremor
without powering, and in the case of powering the power switch, there is no power.
I heated the southern gray with hot jane.
All the problems have ended
. Thank God 10/10
Model: 945GCT-m2
Problem Ram
Ram Volt Ram Ram Mazboot
Charging BIOS and Neither New
Flash Change or New
2 Ice driver has been changed next to Socket Ram
All problems are resolved
English 
العربية